How to Fit a Pulling Attachment WD to Your Belt Setup

By Non-stop dogwear | Published: 2026-11-04

Category: How-to Guides

Learn how to attach the Pulling Attachment WD to your Freemotion harness and belt for safe resistance training, with clear steps and common mistakes to avoid.

Quick answer

To fit the Pulling Attachment WD, first attach it to your Freemotion harness WD at the designated low pulling point, then connect your pulling line to the attachment and secure the other end to your canicross belt. Always check that the attachment is correctly oriented and all connections are tight before training.

Why the low pulling point matters

The Pulling Attachment WD is designed to create a low pulling point on the Freemotion harness WD. This setup is specifically for resistance training, where the dog pulls against a controlled load. A low pulling point helps keep the pull steady and reduces the risk of the harness riding up or twisting during effort. It also makes the resistance feel more consistent for the dog, which is important for building strength safely.

When to use this setup (and when not to)

Use the Pulling Attachment WD only for resistance training sessions, not for regular canicross running or free running. For canicross, you want a high pulling point that allows free movement and efficient stride. The low point created by this attachment is meant to add resistance, so it changes your dog's gait and should be used in short, controlled sessions. Also, this attachment is specific to the Freemotion harness WD; it is not compatible with other harness models.

Step-by-step fitting instructions

Attach the Pulling Attachment WD to the harness: Locate the designated low pulling point on your Freemotion harness WD and clip or thread the Pulling Attachment WD securely into place according to the instructions. Common mistake: attaching it to the wrong ring or at the wrong height, which can cause uneven pull or discomfort. Double-check that the attachment sits at the low point specified for resistance training.
Connect your pulling line to the attachment: Use a compatible pulling line (such as a bungee line) and attach one end to the Pulling Attachment WD using a secure knot or clip. Common mistake: using a line that is too long or too short, which affects control and resistance. Ensure the line is rated for pulling and has no frayed edges.
Secure the other end of the line to your canicross belt: Attach the free end of the pulling line to your canicross belt's attachment point, making sure it is locked and cannot come loose during training. Common mistake: forgetting to close the carabiner or using a belt without a proper quick-release system. Test the connection by giving a gentle tug before adding resistance.
Adjust the line length and check the setup: With your dog wearing the harness and the line attached, adjust the line length so that there is slight tension when your dog is in a standing position. Common mistake: having the line too tight, which restricts movement, or too loose, which reduces control. The line should be taut but not tight when your dog stands normally.
Test with a short warm-up: Before starting resistance training, do a short warm-up walk or light pull to ensure everything stays in place and your dog moves comfortably. Common mistake: skipping the warm-up and going straight into heavy resistance, which can cause strain. Watch for any signs of rubbing or uneven pull during the warm-up.

Product facts

Pulling attachment WD: Accessory for the Freemotion harness WD, allowing you to also use the harness for resistance training with a low pulling point. This means you can convert your existing Freemotion harness WD into a resistance training tool without needing a separate harness.
Pulling attachment WD