Start with a clean, dry surface
Before you peel the backing off a sticker, wipe the spot you have chosen with a damp cloth and let it dry completely. Dust, mud, and oils from your hands are the main reasons stickers lift at the edges. This step matters most on gear that sees sweat, rain, and trail grit, such as a canicross belt or a dog harness.
The supplied product information does not include a manufacturer cleaning routine for the stickers themselves, so keep the surface prep simple: clean, dry, and free of loose debris. Avoid placing stickers over seams, buckles, or areas that flex constantly, because those spots will work the adhesive loose faster.
Good spots for stickers on dog sports gear
- Canicross belt or waist belt: Place a sticker on a flat, non-flexing panel of the belt where it will not rub against your layers or the line. This is an easy way to personalize a canicross belt without affecting how it fits.
- Dog harness: Choose a flat section that does not sit under a strap or against the dog's skin. Gear stickers for a dog harness work best on the outer face of a padded panel, away from adjustment points.
- Water bottle or laptop: The supplied product description lists bottles and computers as suitable items. A bottle is a practical place to show a motivational version, and a laptop lid gives the sticker a smooth, low-wear home.
- Training notebook or gear bin: A flat plastic or metal surface on a storage box or notebook is another low-risk spot. These surfaces do not flex or rub, so the sticker stays put.
What you get in the sticker pack
- Stickers: Decorative stickers you can attach to your bottle, computer or other items. The stickers are designed for smooth, everyday surfaces as well as gear, so you are not limited to one item.
Stickers - Stickers: Available in two color options and a one-size design. One size means you do not need to measure before ordering, but it also means the sticker is a fixed size on every surface.
- Stickers: Choose between two motivational versions: “Unstoppable together” or “Unleash your potential.” The version you pick sets the tone for your gear, so choose the phrase that fits your training mindset.
How to apply a sticker without trapping air
- Position the sticker before peeling: Hold the sticker over the spot and check that it sits flat and clear of seams, buckles, or moving parts. The one-size design gives you a fixed footprint, so confirm it fits the panel you have chosen.
- Peel a small section of backing: Start at one edge and peel back only the first centimeter or so. This gives you a clean edge to anchor while keeping the rest of the sticker protected.
- Press from the center outward: Lay the anchored edge down, then smooth the sticker toward the edges with your thumb. Working outward pushes trapped air ahead of the adhesive instead of sealing it in.
- Check the edges: Run your finger around the perimeter. If an edge lifts, press it back down while the adhesive is still fresh. The supplied information does not specify a curing time, so avoid washing or heavy rubbing right after application.
Black or white, and which version?
- Black / one size / Unstoppable together: A dark sticker suits lighter-colored gear, bottles, or laptop lids where you want the phrase to stand out. The “Unstoppable together” version leans toward team spirit and shared runs.
- White / one size / Unleash your potential: A white sticker reads clearly on dark belts, harnesses, and dark bottles. The “Unleash your potential” version is a more individual, goal-focused phrase.
Where not to put a sticker
Skip any spot that rubs against the dog's coat or your clothing during a run. On a harness, that means avoiding the inside faces and the areas under load. On a canicross belt, keep stickers away from the line attachment and any buckle you adjust mid-run.
Also avoid surfaces that flex repeatedly, such as a soft flask or a thin stuff sack. The supplied product details do not list a waterproof or weatherproof rating, so if you ride or run in heavy rain, a sticker on an exposed outdoor surface may not last as long as one on a bottle or laptop.
A small spare part with a practical job
The stickers are part of Non-stop dogwear's spare parts collection, which makes them an easy add-on when you are already ordering replacement parts for your belt or harness. At the catalog price of USD 7.20, they are a low-cost way to mark your gear so it is easier to spot in a shared training bag.
If you are personalizing a canicross belt, pair the stickers with a front piece or buckle replacement so your setup is both functional and recognizable. The stickers do not change fit or performance, so treat them as a finishing touch rather than a repair.
